The Whistler Group SC04 Manuale Utente
52
Initializing Global Settings
You can reset the global radio parameters to their
factory state without losing information stored in the
scanner’s working memory. However, any changes
to the radio’ s global settings will be lost.
factory state without losing information stored in the
scanner’s working memory. However, any changes
to the radio’ s global settings will be lost.
NOTE: V-Scanner memory is not affected by this
operation.
To initialize Global settings:
operation.
To initialize Global settings:
1. Turn off the scanner, then turn it on again.
2. When the Welcome/Ownerscreen appears,
2. When the Welcome/Ownerscreen appears,
press
0. The scanner displays:
3. Press 2. The scanner displays:
4. Press ENT. The scanner displays:
5. Press any key to proceed. The scanner reboots
with default global parameters.
System Tests:
Select a Test...
Exits if no key
is pressed
Select a Test...
Exits if no key
is pressed
Init GLOB data
To factory state
ENTER if APPROVE
CLEAR to EXIT
To factory state
ENTER if APPROVE
CLEAR to EXIT
GLOB EEPROM area
Initialized to defaults.
Press any key.
Initialized to defaults.
Press any key.