The Whistler Group SC04 Manuale Utente
53
Initializing to Factory Defaults
You can initialize the entire scanner to factory defaults.
This clears all programmed data and global settings.
This clears all programmed data and global settings.
NOTE: You can save your working memory to a
V-Scanner folder before performing this operation.
V-Scanner memory is not affected by this procedure.
To initialize to factory defaults:
V-Scanner folder before performing this operation.
V-Scanner memory is not affected by this procedure.
To initialize to factory defaults:
1. Turn off the scanner, then turn it on again.
2. When the Welcome/Ownerscreen appears,
2. When the Welcome/Ownerscreen appears,
press
0. The scanner displays:
3. Press 1. The scanner displays:
4. Press ENT. The scanner displays:
5. Press any key to proceed. The scanner reboots
with file system and global parameters reset to
factory defaults.
factory defaults.
System Tests:
Select a Test...
Exits if no key
is pressed
Select a Test...
Exits if no key
is pressed
Factory Init
Erase Memory
ENTER if APPROVE
CLEAR to EXIT
Erase Memory
ENTER if APPROVE
CLEAR to EXIT
File System
Initialized to Defaults.
Press any key.
Initialized to Defaults.
Press any key.