Applied Concepts Inc ACMI006 Manuale Utente

 

 

The  PS 5/20 key is used to set the low-end patrol speed.  The right 
two digits of the patrol window refer to the current low-end patrol 
speed of either 5 mph, 10mph, or 20 mph.  For example, sensitivity 1 
with  
5 mph low-end patrol speed would be indicated by: SEn 1   5 
(Fig 12).  Sensitivity 1 with 20 mph low-end patrol speed would be: 
SEn 1  20 (Fig 13). During VSS operation this function is not 
required and thus is not available. During VSS operation, when the 
PS 5/20 key is pressed, SP will be momentarily displayed. 

Fig 12 

Fig 13 

The range (or sensitivity) of S 

is adjusted by 

pressing the SEn key.  This key cycles through the four (4) sensitivity 
levels;  SEn 1,  SEn 2,  SEn 3, and SEn 4 (Fig 14 - Fig 17, 
respectively).  In each case, the center display refers to the current 
sensitivity setting.  The shortest range is SEn 1 (Fig 14), and the 
longest range is SEn 4 (Fig 17).  The range (or sensitivity) must be 
set for same lane moving mode and opposite lane 
moving/stationary mode separately.  While in each mode, (same 
lane and opposite lane), indicated by the presence or absence of the 
SAME icon, set each sensitivity as described above. 

Fig 14 

Fig 15 

Fig 16 

Fig 17 

10