Applied Concepts Inc ACMI006 Manuale Utente
DISPLAY OPERATION
Display Front Panel
S
XMIT FRONT REAR
SAME SLOW
FAST LOCK
TARGET
PATROL
Fig 1
Display Unit Functions
PWR: The
PWR switch is the main On/Off power switch.
TARGET WINDOW:
The left, three-digit LCD window is the target window. This window displays the
speed of targets entering the radar beam. While in stationary mode, the target window
will show the speed of the strongest approaching or the strongest receding target
relative to the radar. In opposite lane moving mode, the target window will show the
speed of the strongest opposite lane approaching target or the strongest opposite lane
receding target. In same lane moving mode, the target window will show the speed of
the strongest same lane faster (front or rear) target or the strongest same lane slower
(front or rear) target. See SAME LANE THEORY, page 14.
speed of targets entering the radar beam. While in stationary mode, the target window
will show the speed of the strongest approaching or the strongest receding target
relative to the radar. In opposite lane moving mode, the target window will show the
speed of the strongest opposite lane approaching target or the strongest opposite lane
receding target. In same lane moving mode, the target window will show the speed of
the strongest same lane faster (front or rear) target or the strongest same lane slower
(front or rear) target. See SAME LANE THEORY, page 14.
MIDDLE WINDOW:
The middle, three-digit LED window is a dual purpose window. First, it is used for
locking the strongest target shown in the left window. In addition, the middle window
is used to display the faster target in the radar beam. The LOCK and FAST icons are
used to indicate the current use of the window.
locking the strongest target shown in the left window. In addition, the middle window
is used to display the faster target in the radar beam. The LOCK and FAST icons are
used to indicate the current use of the window.
The middle window is used to store target speeds that the operator chooses to "lock"
using the LOCK/REL key. The presence of the LOCK icon indicates that the middle
window contains a "locked" target speed.
using the LOCK/REL key. The presence of the LOCK icon indicates that the middle
window contains a "locked" target speed.
When
the
faster mode is selected and when no LOCK target is present, the middle
window is used to track the faster target in the radar beam. Faster mode is turned on
and off by using the menu button. The presence of the FAST icon indicates that the
faster mode is selected.
and off by using the menu button. The presence of the FAST icon indicates that the
faster mode is selected.
PATROL WINDOW:
The right, three-digit LCD window is the patrol window. In moving mode, the
operator should always verify that the patrol window is tracking the patrol vehicle's
speedometer. After locking a target speed, the patrol window may be "blanked" by
pressing the PS BLANK key. Restore the patrol speed by pressing the PS BLANK
key a second time.
operator should always verify that the patrol window is tracking the patrol vehicle's
speedometer. After locking a target speed, the patrol window may be "blanked" by
pressing the PS BLANK key. Restore the patrol speed by pressing the PS BLANK
key a second time.
XMIT:
The XMIT icon indicates that S
PATROL
is transmitting on the currently
selected antenna.
FRONT:
The FRONT icon indicates the front antenna is selected for use. The icon will light
with a steady indication if the antenna is operational or a blinking indication if the
antenna is missing or inoperative.
with a steady indication if the antenna is operational or a blinking indication if the
antenna is missing or inoperative.
3