FLIR Commercial Systems Inc. RT30 Manuale Utente
RT30
™ Engineering Design Specification
Page 7 of 20
4.2 B
ASIC
O
VERVIEW
4.2.1 Transmitter
Unit
The Transmitter Unit is shown
in Figure 3. Transmitter Unit
features include:
in Figure 3. Transmitter Unit
features include:
• a Power/Mode switch
to control the basic
operation of the RT30
TU;
operation of the RT30
TU;
• a Calibrate/Channel
Switch to calibrate the
Light Mode, and to
change the wireless
channel of the RT30;
Light Mode, and to
change the wireless
channel of the RT30;
• Power and Detect
LEDs;
• an NCV Channel to
route building wiring to
the AC voltage
detector;
the AC voltage
detector;
• a Light Detector to
measure room lighting;
•
an External Probe
Connector to attach auxiliary probes.
Connector to attach auxiliary probes.
Figure 3 – Transmitter Unit
4.2.2 Receiver
Unit
The Receiver Unit is shown in Figure 4, and has the following
features:
features:
• a Power/Mode Switch to control the basic operation of the
RT30
RU;
• Power, Detect, and Communication LEDs;
• a Detect Beeper for audible alarms and feedback, which
• a Detect Beeper for audible alarms and feedback, which
can be silenced.
Confidential and Proprietary, Extech Instruments