Lexmark International Inc N8050 Manuale Utente

After the internal wireless print server has been installed in a printer, there are two ways the print 
server can be configured for use on a wireless network: Configuring the print server using the 
Wireless Setup Utility, or by manual configuration. 

Configuring the print server using the Lexmark Wireless Setup Utility involves connecting the printer 
in which the internal wireless print server has been installed to a computer by USB cable and 
launching the MarkNet N8050 

 CD. The Lexmark Wireless Setup Utility then provides 

both a Wizard mode and an Advanced mode of operation. The Wizard mode steps the user through 
the configuration process. The Advanced mode provides an interface through which the user can 
directly enter and apply the appropriate wireless configuration settings for the wireless network that 
the printer will be used on. 

When configuring with the Lexmark Wireless Setup Utility, 802.1x — RADIUS 
authentication is only available through the Advanced mode of operation. 

Manual configuration is intended for advanced users and involves communicating with the print 
server over an Ad-Hoc wireless connection without the use of the Lexmark Wireless Setup Utility or a 
direct USB connection. Users who prefer to perform the manual configuration method require an 
in-depth understanding of the wireless settings for the network. For instructions on manually 
configuring the internal wireless print server, see 

.

The internal wireless print server option card has been installed correctly in the printer.

All access panels and printer doors have been replaced or closed. 

The toner or print cartridges are installed correctly.

Paper has been loaded into the printer.

The printer is turned on and ready to be installed.

For help setting up your printer see your printer documentation.