Lexmark International Inc N8050 Manuale Utente
Using the Wireless Setup Utility
6
For Wizard Mode
In Wizard mode, the Lexmark Wireless Setup Utility gathers wireless information from the computer
the printer is connected to. The results of this query determine the process for selecting the correct
SSID.
the printer is connected to. The results of this query determine the process for selecting the correct
SSID.
1
Select the appropriate Network Name (SSID).
Wireless Configurations Found on Your Computer
•
If existing wireless configurations are found on the computer, select the appropriate
Network Name (SSID)
from the list, click
Next
, and go to step 2.
•
If the correct network name is not in the list, select the
I want to enter a different
configuration
radio button, click
Next
, and go to
Wireless Networks Found in Your
Area
.
Wireless Networks Found in Your Area
•
If existing wireless configurations are not found on the computer, the setup utility scans
for available wireless networks. Select the appropriate
for available wireless networks. Select the appropriate
Network Name (SSID)
from the
list, click
Next
, and go to step 2.
•
If the correct network name is not in the list, select the
I want to enter a different
network name
radio button, click
Next
.
2
Select the appropriate security method, and then click
Next
. If no security was detected, go
to step 8.
3
Enter the appropriate security key(s) for the network, and then click
Next
.
4
Check each network attribute on the summary screen to make sure that the settings are
correct. If the settings are correct, click
correct. If the settings are correct, click
Next
to apply these settings to the print server.
Note:
Clicking
Next
will prompt the setup utility to attempt to communicate with the printer
using a wireless connection. This verification process can take up to 120 seconds.
If you are sure that the wireless settings displayed on the screen are correct, and
you do not want to initiate the wireless verification process, or you are configuring
the print server for use on a network that is not immediately available, click the
If you are sure that the wireless settings displayed on the screen are correct, and
you do not want to initiate the wireless verification process, or you are configuring
the print server for use on a network that is not immediately available, click the
Do
not verify the print server can join the network
check box to skip the wireless
verification test and go to step 6.
5
Verify that the print server can communicate over the network.
•
If the print server was successfully configured and is available on the network, click
Finish
to close the Setup Utility.
•
If the print server was not able to join the wireless network, click
View Settings
to verify
that the wireless settings are correct, select the appropriate option, and click
Next
.
6
Disconnect the USB cable from both the computer and the printer.
7
Remove the
Setup Utility
CD from your computer, insert your printer drivers CD or printer