Lexmark International Inc N8050 Manuale Utente

Verify that the print server can communicate over the network. 

If the print server was successfully configured and is available on the network, click 

 to close the Setup Utility. 

If the print server was not able to join the wireless network, click 

 to verify 

that the wireless settings are correct, select the appropriate option, and click 

. 

Disconnect the USB cable from both the computer and the print server. 

Remove the 

 CD from the computer, insert the printer drivers CD or printer 

software CD, and proceed to 

The Advanced Mode home screen provides additional options for using the Lexmark Wireless Setup 
Utility. Clicking 

 will revert the Wireless Setup Utility to Wizard Mode. Clicking 

 

provides the following management options: 

Select either 

or 

 as the default startup mode for the Utility. 

Select the 

 check box to bypass the 

wireless communication verification process. The verification process can take up to 120 
seconds. If you are configuring the print server remotely (away from the wireless network that 
the printer will be used on) or simply do not want to verify wireless communication with the 
printer, select this check box and go to step 1. 

Select the wireless mode that the network uses (Infrastructure or Ad-Hoc mode).

Enter the Network Name (SSID) of the network for which the printer will be used.

The SSID must be entered exactly as it is used on the network. SSID’s are 
case-sensitive, so if the SSID is entered incorrectly, the print server will not be able 
to communicate on the network, and the configuration process must be repeated. 

Select the appropriate channel for the network.

Select the appropriate authentication type for the network. The authentication type options 
are dependent on the wireless mode that was selected in step 1, and will determine the types 
of encryption that will be available.

For Infrastructure mode: 

Open 

Shared

WPA™ — Personal

802.1x — RADIUS

For Ad-Hoc mode: 

Open