Afimilk Agricultural Cooperative Ltd. 4256000 Manuale Utente
Oct 2013
AfiAct II™ User Manual
18
AfiTag II Maintenance
Chapter
2
2
AfiTag II Maintenance
AfiTag II is responsible for continuously sending cow data to the AfiAct II system. It
is factory-set to use the specific frequency and channel corresponding to your
region. It is the farmer’s responsibility to attach the tags to all cows in the group and
enter their ID into the system. Furthermore, when a cow is removed from the group,
it is the farmer’s responsibility to remove the tag from its leg and inform the system.
A removed tag may be stored or immediately re-used on another animal.
is factory-set to use the specific frequency and channel corresponding to your
region. It is the farmer’s responsibility to attach the tags to all cows in the group and
enter their ID into the system. Furthermore, when a cow is removed from the group,
it is the farmer’s responsibility to remove the tag from its leg and inform the system.
A removed tag may be stored or immediately re-used on another animal.
The tag is attached to the cow’s leg using a flexible strap. It is mandatory to use an
original afimilk strap.
original afimilk strap.
This chapter provides detailed instructions for tag management:
x Tag attachment, see 2.1
x Tag replacement (when a tag is moved from one animal to another) , see 2.2
x Tag storage, see 2.3
NOTE
The tags only transmit when held in vertical
position. Therefore, when tags are transported,
ensure they are in horizontal position.
position. Therefore, when tags are transported,
ensure they are in horizontal position.
When a cow is lying down, the data is
collected, but will only be transmitted when the
cow is up again.
collected, but will only be transmitted when the
cow is up again.
Tag transmits
Tag does not
transmit
transmit