Chamberlain Wireless Products Inc. CWA2000 Manuale Utente
Overview
The Wireless Motion Alert uses a Passive Infra-Red
(PIR) sensor to detect movement of people and
vehicles, while allowing small animals to pass through
undetected. The base station can be powered by 4
AA batteries for hours of continuous, wire-free
operation or plugged in using the AC adapter.
(PIR) sensor to detect movement of people and
vehicles, while allowing small animals to pass through
undetected. The base station can be powered by 4
AA batteries for hours of continuous, wire-free
operation or plugged in using the AC adapter.
Model CWA2000
Wireless Motion Alert
1
Base Station
Passive Infra-Red (PIR)
Motion Sensor
Swivel Bushing
Mounting Plate
AC Adapter
Rubber Pads
Sun/Rain Shield
®
Operation & Features
Batteries: The AA batteries (not provided) in the
base station should last up to one month. If the base
station batteries are low, it will beep every few
minutes. The AA batteries (not included) in the PIR
motion sensor will last up to 2 years depending on
use (lithium batteries are recommended for colder
environments). For peak performance, inspect
batteries annually and replace as needed.
base station should last up to one month. If the base
station batteries are low, it will beep every few
minutes. The AA batteries (not included) in the PIR
motion sensor will last up to 2 years depending on
use (lithium batteries are recommended for colder
environments). For peak performance, inspect
batteries annually and replace as needed.
Programming Additional PIR Motion Sensors: The
Base Station can learn the code of up to 3 additional
PIR Motion Sensors, responding with unique buzzes.
To program additional PIR Motion Sensors see
Step 6.
To order additional PIR Motion Sensors call
1-800-528-9131.
Base Station can learn the code of up to 3 additional
PIR Motion Sensors, responding with unique buzzes.
To program additional PIR Motion Sensors see
Step 6.
To order additional PIR Motion Sensors call
1-800-528-9131.
Clear Memory: Press and hold the Learn Button on
the Base Station until 3 beeps are heard.
the Base Station until 3 beeps are heard.
On/Off: To turn the base station on and off, hold
down the power button until you hear the on/off tone.
down the power button until you hear the on/off tone.
Volume: The base station is equipped with
adjustable volume controls. The lowest volume
setting is the mute feature.
adjustable volume controls. The lowest volume
setting is the mute feature.
To prevent possible SERIOUS INJURY or DEATH from
electrocution, outputs are suitable ONLY for controlling low
voltage devices, 24V max, ac or dc.
electrocution, outputs are suitable ONLY for controlling low
voltage devices, 24V max, ac or dc.
Carton Inventory
Antenna
On/Off Button
Volume
Base Station