Chamberlain Wireless Products Inc. TIU1 Manuale Utente
Model OTIU 608-1
4/5/2006
Patents Pending
- 3 -
GENERAL INFORMATION
PARTS SUPPLIED
- 10 -
TO ENABLE/DISABLE CALL FORWARDING
INSTALLING THE OTIU
TO CHANGE THE NUMBER OF TIMES THE OTIU RINGS THE PHONE
TO PLACE THE OTIU IN INTERCOM MODE
TO ENABLE/DISABLE INTERCOM MODE
1 - Oracle Telephone Interface Unit (OTIU)
1 - Antenna
1 – 18V Power Adapter
1 – Phone Cord
1 – Set of 4 Bumper Feet
Place the 4 Bumper Feet onto the bottom of the OTIU. This will
keep the unit from sliding around.
Plug the antenna into the back of the Telephone Interface Unit
(OTIU) where it is labeled "antenna". Make sure to position the
antenna wire pointing straight up from the unit to achieve
maximum range.
The Oracle Telephone Interface Unit (OTIU) allows you to talk to
visitors at your gate or door, when used with the Oracle PRO Gate
System, MiniGAP, and/or Oracle FrontDoor Unit. When used with
the Oracle PRO Gate System or MiniGAP, the OTIU allows you to
activate your gate from your phone, no matter where you are, using
your telephone keypad.
The OTIU easily connects to any phone or phone system and
provides Long-Range Wireless Connection from the Oracle GAP,
MiniGAP, or FrontDoor to any or all of the phones.
The OTIU works at it's maximum potential when utilized with an
Expandable Phone System* and is the recommended setup for this
product. With this type of setup, the OTIU will ring all of the phones
in your house when there is a visitor at your gate or front door.
When you have different types of phones (non-expandable
systems) throughout your house, the OTIU will only ring the phone
that it is connected to.
*One base station, requiring only one phone jack allowing you to
add additional handsets into the system that use wall power only.
To enable the Call Forwarding function, use the telephone that is directly
connected to the OTIU and dial:
To enable the Call Forwarding function, use the telephone that is directly
connected to the OTIU and dial:
To enable the Intercom Mode function, with the phone cord plugged into
the wall jack and using the telephone that is directly connected to the
OTIU, dial:
To disable the Intercom Mode function, with the phone cord plugged into
the wall jack and using the telephone that is directly connected to the
OTIU, dial:
*
*
*
*
0
0 2
1
If you would like the OTIU to act independently from your home phone line,
you can simply have it as part of your network in intercom mode. To
enable/disable this feature, you will need to have the phone cord plugged
into the wall jack.
*
*
*
*
1
0 3 2
0 3
Unplug the phone cord from the wall jack.
NOTE: If you have the Intercom Mode enabled on the OTIU you cannot use
the Call Forwarding feature, as there is no line to dial out on.
By default, the OTIU will ring the telephone 4 times. You might want to
change the number of times the telephone rings for any given reason.
For example, if you have an answering machine and it is programmed to
pick up after 4 rings, you might want to change the OTIU to ring the
telephone only 3 times. This will prevent your answering machine from
picking up if your phone is not answered when someone presses the
“CALL” button on your GAP, MiniGAP, or FrontDoor Unit.
NOTE: If your answering machine does pick up, the visitor will hear your
answering machine message through the speaker.
Using the telephone that is directly connected to the OTIU, dial:
"BEEP"
"BEEP"
* *
1 0 2
for 2 rings, up through
* *
1 0 5
for 5 rings.