Chamberlain Wireless Products Inc. TIU1 Manuale Utente
Model OTIU 608-1
4/5/2006
Patents Pending
2.2
4.1
2.3
4.2
- 5 -
- 8 -
ACTIVATING THE OTIU WITH FRONTDOOR
(IF THERE IS NO EXISTING NETWORK)
(NOTE: Both step A & B must occur within 15 seconds of each other)
(Does NOT require Caller ID Service with your telephone company)
USING THE OTIU
CALLER ID FUNCTION
(Does NOT require Caller ID Service with your telephone company)
CALL WAITING FUNCTION
ACTIVATING THE OTIU WITH MINIGAP
(IF THERE IS NOT AN EXSISTING NETWORK)
(NOTE: Both step A & B must occur within 15 seconds of each other)
A. Using the phone that is connected to the OTIU, once you hear a
dial tone press:
Hang up and the LEARN light will flash for up to 15 seconds. If
it does not and you hear an error tone, see “How do I clear the
memory”, in the FAQ section. Otherwise, repeat the process.
B. On the FrontDoor, press and hold down the learn button for 1
second, to put it into learn mode.
NOTE: The learn button is a little black button located on the
inside of the unit at the very top of the circuit board.
The OTIU will ring the telephone and Caller ID will display "Unit
Learned".
A. Using the phone that is connected to the OTIU, once you hear a
dial tone press:
Hang up and the LEARN light will flash for up to 15 seconds. If
it does not and you hear an error tone, see “How do I clear the
memory”, in the FAQ section. Otherwise, repeat the process.
B. On the MiniGAP, press and hold down the learn button for 1
second, to put it into learn mode.
NOTE: The learn button is a little black button located on the
inside of the unit at the very top of the circuit board.
The OTIU will ring the telephone and Caller ID will display "Unit
Learned".
* *
0 7
* *
0 7
"BEEP"
"BEEP"
When a visitor presses the CALL button, the telephone that is connected to
the OTIU will give a distinctive ring up to 4 times. Or in the case of having
an expandable phone system, all phones within the system will ring. Simply
answer the phone and you will automatically connect to the Intercom at the
gate or door.
After you have connected to the Intercom, if the visitor is at a Gate, you
can then activate that Gate by dialing:
NOTE: At any time, you can pick up the telephone that is plugged into the OTIU and
dial *9 to activate the primary gate contoller.
*
9
If you are talking on the telephone that is plugged into the OTIU, you will
hear a distinctive call waiting beep on the line and the Caller ID will display,
as above, alerting you to a visitor. To place the call on hold and connect to
the Oracle Intercom, press the FLASH button (or switchhook) as you would
to answer any call waiting call.
If you are talking on a different telephone, which is not in an expandable
phone system, the telephone that is connected to the OTIU will ring as
normal.
When there is a gate visitor, the OTIU will display 'Gate Visitor' on a Caller
ID telephone (or Caller ID box) that it is directly connected to.
When there is a door visitor, the OTIU will display 'Front Door' or 'Back
Door' depending on how you have your FrontDoor set up (see the
FrontDoor unit instruction manual).