EON Corporation E1000V Manuale Utente
EON Corporation 2003
Changes or modifications not expressly approved by the manufacture could void the
user's authority to operate the equipment.
user's authority to operate the equipment.
The VIU antenna must be installed in the vending machine in a location that will
provide a separation distance of at least 71 centimeters from the user of the machine
or nearby persons.
provide a separation distance of at least 71 centimeters from the user of the machine
or nearby persons.
Once the housing is physically installed in the vending machine, it must be initialized
(powered up) with the door to the vending machine open and with the password button
depressed. This is accomplished by simply plugging the DC power adapter into the
vending machines standard 110V outlet. This allows the VIU to retrieve the password
from the vending machine controller board.
To verify that installation has been properly completed, watch for the red transmit light to
flash once, and all lights to turn down except the yellow LED. At this point the
installation is complete. If this light sequence is not observed, repeat the installation
steps. If all steps are deemed to be completed successfully and the correct light flashing
sequence is still not observed, remove the VIU from the vending machine and return to
EON for service or repair.
FCC Warning:
(powered up) with the door to the vending machine open and with the password button
depressed. This is accomplished by simply plugging the DC power adapter into the
vending machines standard 110V outlet. This allows the VIU to retrieve the password
from the vending machine controller board.
To verify that installation has been properly completed, watch for the red transmit light to
flash once, and all lights to turn down except the yellow LED. At this point the
installation is complete. If this light sequence is not observed, repeat the installation
steps. If all steps are deemed to be completed successfully and the correct light flashing
sequence is still not observed, remove the VIU from the vending machine and return to
EON for service or repair.
FCC Warning:
RF Exposure Statement: