HID Global Corporation 5553 Manuale Utente

 

 

 

1508-USM-00-0-04 

 

HF Multi ISO RFID Reader User Manual, Firmware V1.4 

 

A 

To test and interface the MultiISO Compact or Comfort Module, you do not need a 
sophisticated µP development system. All you need is a PC, a connection cable and a 
suitable power supply for the reader. If you are using Microsoft Windows 
(95/98/NT/XP/...), take the following steps: 
 

Make sure that your reader has an RS232 interface 

 Start 

HyperTerminal 

 

Create a new connection (FILE/NEW CONNECTION) 

 

Enter a name for the connection (i.e. ‘MIFARE ’) 

 

Select connect COM2 (COM1) direct connection 

 

Connection setup 9600,8,n,1,no handshake 

 

Connect your reader to COM2 (COM1) of the PC and apply appropriate supply 
voltage. The reader transmits a string (“MultiISO 1.2”) to the PC. 

 

This string denotes the firmware provided with your reader module 

 

Put a tag to your reader. Serial numbers should be displayed properly 

Enter commands (see 

Page 104 of 144 

 

August 2010 

© 2005-2010 HID Global Corporation.  All rights reserved.