Справочник Пользователя для HID Global Corporation 5553
1508-USM-00-0-04
HF Multi ISO RFID Reader User Manual, Firmware V1.4
4
Frequently Asked Questions
4.1 Getting Started
Q.
How do I get started?
A
To test and interface the MultiISO Compact or Comfort Module, you do not need a
sophisticated µP development system. All you need is a PC, a connection cable and a
suitable power supply for the reader. If you are using Microsoft Windows
(95/98/NT/XP/...), take the following steps:
sophisticated µP development system. All you need is a PC, a connection cable and a
suitable power supply for the reader. If you are using Microsoft Windows
(95/98/NT/XP/...), take the following steps:
Make sure that your reader has an RS232 interface
Start
HyperTerminal
Create a new connection (FILE/NEW CONNECTION)
Enter a name for the connection (i.e. ‘MIFARE ’)
Select connect COM2 (COM1) direct connection
Connection setup 9600,8,n,1,no handshake
Connect your reader to COM2 (COM1) of the PC and apply appropriate supply
voltage. The reader transmits a string (“MultiISO 1.2”) to the PC.
voltage. The reader transmits a string (“MultiISO 1.2”) to the PC.
This string denotes the firmware provided with your reader module
Put a tag to your reader. Serial numbers should be displayed properly
Enter commands (see
Page 104 of 144
August 2010
© 2005-2010 HID Global Corporation. All rights reserved.