HID Global Corporation 5553 Manuale Utente

 

HF Multi ISO RFID Reader User Manual, Firmware V1.4 

 

1508-USM-00-0-04 

 

This command reads multiple data blocks on a card. The size of the returned data depends on the 
tag used. The block address range depends on the tag as well. 

'rd' 

Start block address (1 byte) 
Number of blocks to read (1 byte) 

Data 

data block (depends on tag type) 

'F' 

Error: read failure  [bad data or address range error] 

'N' 

Error: No tag in field  [addressed tag not present or not responding] 

'O' 

Error: Operation mode failure 

rd0504 

Reads 4 blocks starting with block 05. 

2.3.1.25.1  Operation mode failure 'O' 

The presented tag is not ISO14443 type A, SR 176, ICode or ISO 15693 compliant. 

For ISO 14443 type A only MIFARE tags are supported. 

 

This command reads the internal reader EEPROM. It contains all start-up parameters and the 
device ID. Changes in the start-up settings will only go into effect after a reset of the device. 

'rp' 

EEPROM address (1 byte) 00h … EFh 

Data 

EEPROM data (1 byte) 

'R' 

Error: Out of range failure  [entered address is not valid] 

rp0B 

Reads protocol configuration register. 

 

August 2010 

 

Page 63 of 144 

© 2005-2010 HID Global Corporation.  All rights reserved.