HID Global Corporation 4045 Manuale Utente

Pagina di 60
 
ENTRYPROX – 4045-907  REV A 
30 
CARD/PIN PROGRAMMING SEQUENCES 
Following are the most commonly used command sequences 
for programming user data into the EntryProx: 
 
PROGRAMMING PIN + CARD 
To program a user for both Code AND Card: 
1. Place the EntryProx unit in program mode. Press: 
99 # Master Code * (default is 1234) 
2. On the EntryProx keypad, press: 
50 # user-type # user location # keypad PIN 
* keypad PIN * <present card>    
3.Press to exit program mode. 
 
QUICK PROGRAMMING EITHER PINS OR CARDS 
A “quick program” feature allows user data entry with 
minimal keystrokes. No command number is required.  This 
feature programs either a card or a PIN, not a combination, 
and it automatically selects a “Normal” user access type.  Just 
enter the user’s location and the PIN (or present card): 
1. Place the EntryProx unit in program mode. Press:
 
99 # Master Code * (default is 1234) 
2. On the EntryProx keypad, press: 
user location # PIN * PIN *   OR 
user location # ** <present card> 
3. Press to exit program mode. 
 
PROGRAMMING PIN CODE ONLY USE 
To program PIN Code ONLY operation with Command 50 
use the following program sequence: 
1. Place the EntryProx unit in program mode. Press:
 
99 # Master Code * (default is 1234) 
2. On the EntryProx keypad, press: 
 50 # user-type # user location # keypad PIN 
* keypad PIN * 
3. Press to exit program mode. 
 
USER TYPES - REMINDER 
0-Toggle 1-Normal  2-Dump 3-Lockout