Справочник Пользователя для HID Global Corporation 4045

 

ENTRYPROX – 4045-907  REV A 

30 
CARD/PIN PROGRAMMING SEQUENCES 

Following are the most commonly used command sequences 
for programming user data into the EntryProx: 
 

To program a user for both Code AND Card: 

1. Place the EntryProx unit in program mode. Press: 

99 # Master Code * (default is 1234) 

2. On the EntryProx keypad, press: 

3.Press * to exit program mode. 

A “quick program” feature allows user data entry with 
minimal keystrokes. No command number is required.  This 
feature programs either a card or a PIN, not a combination, 
and it automatically selects a “Normal” user access type.  Just 
enter the user’s location and the PIN (or present card): 

1. Place the EntryProx unit in program mode. Press:

 

99 # Master Code * (default is 1234) 

2. On the EntryProx keypad, press: 

user location # PIN * PIN *   OR 
user location # ** <present card> 

3. Press * to exit program mode. 

To program PIN Code ONLY operation with Command 50 
use the following program sequence: 

1. Place the EntryProx unit in program mode. Press:

 

99 # Master Code * (default is 1234) 

2. On the EntryProx keypad, press: 

3. Press * to exit program mode.