HID Global Corporation X001900 Manuale Utente
© 2012 HID Global Corporation. All rights reserved.
129
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Using the Print TOF (Top of Form) Option
Follow these instructions:
Step
Procedure
1
Print the alignment card self-test (The front edge should look like figure below).
2
Adjust the Print TOF until the green border is eliminated and the entire
Transfer Alignment Block is shown in the center of the card. Note
Transfer Alignment Block is shown in the center of the card. Note
– due to
variation in roller alignment, the green border may appear at a slight angle on
the top of the card.
the top of the card.