Trimble Inc. 66400 Manuale Utente

6     Getting Connected

88     Juno Series User Guide

Once you configure the connection between the Juno series handheld and the 
Bluetooth-enabled serial device, you must configure the software to use the 
connection to receive data.

To use a Bluetooth-enabled external sensor such as a laser rangefinder or a barcode 
scanner in TerraSync software, see below.

To configure the TerraSync software to use data from an external source, for example, a 
laser rangefinder or barcode scanner:

1.

Start the TerraSync software and then open a data file.

2.

In the Setup section, tap 

. The 

External Sensors form appears. 

3.

If you are connecting to:

–

a laser rangefinder, select the Laser check 
box and then tap the 

 button 

beside the Laser check box. The Laser 
Properties form appears.

–

a barcode scanner or other external sensor, 
select the Sensor 1 or Sensor 2 check box and 
then tap the 

 button beside the 

appropriate check box. The Sensor Properties 
form appears.

4.

If you are connecting to a barcode scanner or other external sensor, enter a 
name for the connection in the Name field.

5.

From the Port drop-down list, select the name of the COM port that you selected 
in the Bluetooth application when you set up the connection to the  device.

6.

Tap 

 to confirm the sensor settings and return to the External Sensors form.

7.

Tap 

to confirm the settings and return to the main screen of the Setup 

section.

8.

The external sensor is now setup for use and can be used to add data as 
attributes into an open file in TerraSync. The device is automatically connected 
and disconnected when data files in TerraSync are opened and closed.

To check the status of the connection, select the Comms subsection in the 
Status section of the GPS field software.