Trimble Inc. 66400 Manuale Utente

Juno Series User Guide

Getting Connected

Connecting to an office computer to use ActiveSync technology

Instead of using a USB or serial cable to physically connect to an office computer, you
can use Bluetooth wireless technology to connect to ActiveSync technology or the
Windows Mobile Device Center on a Bluetooth-enabled office computer.

Note –

Not all Bluetooth devices and Bluetooth management software support ActiveSync

connections. Check with the manufacturer of the office computer for compatibility.

Note –

The exact steps required may vary depending on the office computer.

To connect to a office computer to use ActiveSync with a Bluetooth connection, you
must:

Set up the connection to the computer.

Connect to ActiveSync using Bluetooth wireless technology.

Step 1: Setting up the connection to the computer

From the Bluetooth user interface on the office computer, make sure that the
computer allows itself to be discovered by other Bluetooth devices.

Configure the ActiveSync software on the office computer to connect to the
correct Bluetooth port. The steps required depend on the operating system
installed on the office computer. If the office computer is using:

•

the Windows Vista operating system:

From the Start menu on the office computer, select Control Panel /
Hardware and Sound / Windows Mobile Device Center.

The Connection Settings dialog appears:

Select the Allow connections to one of the following check box.

From the list, select Bluetooth and then click

•

the Windows XP or 2000 operating system:

From the Bluetooth user interface on the office computer, identify the
virtual COM port of the host Bluetooth Serial Port or Local Service and
ensure that this is enabled. In this example, the virtual COM port is COM5.

Start the ActiveSync software on the office computer.

Select File / Connection Settings.