Rosemount Tank Radar AB 5900 Manuale Utente
Reference Manual
300520EN, Rev AA
November 2009
November 2009
6-7
Rosemount 5900 Series
Section 6. Service and Troubleshooting
6.2.4
Diagnostics
The TankMaster WinSetup program lets you view the current device status.
The View Diagnostic Register window shows a selection of database registers
that gives you an instant view of how the gauge operates. You may also
configure the window by adding registers of special interest.
The View Diagnostic Register window shows a selection of database registers
that gives you an instant view of how the gauge operates. You may also
configure the window by adding registers of special interest.
To view and configure the diagnostic registers:
1. Select the 5900 gauge icon in the TankMaster WinSetup workspace.
2. Click the right mouse button and choose View Diagnostic Registers.
The register values in the diagnostics window are of read only type. They are
loaded from the device as the window is opened.
loaded from the device as the window is opened.
A grey background color of the table cell in the Value column means that the
register is of either Bitfield or ENUM type. An expanded Bitfield/ENUM
window can be opened for this type of register. Double-click the cell to open
the Expanded Bitfield/ENUM window.
register is of either Bitfield or ENUM type. An expanded Bitfield/ENUM
window can be opened for this type of register. Double-click the cell to open
the Expanded Bitfield/ENUM window.
If needed, the values can be presented as hexadecimal numbers. This
applies to registers of the Bitfield and ENUM types. Select the Show in Hex
check box to present Bitfield and ENUM registers as hexadecimal numbers.
applies to registers of the Bitfield and ENUM types. Select the Show in Hex
check box to present Bitfield and ENUM registers as hexadecimal numbers.
The Configure button lets you open the Configure Diagnostic Registers
window where you can change the list of registers to be displayed in the View
Diagnostic Registers window. See the Raptor System Configuration Manual
(Document No. 300510EN) for more information.
window where you can change the list of registers to be displayed in the View
Diagnostic Registers window. See the Raptor System Configuration Manual
(Document No. 300510EN) for more information.
The Configure Diagnostic Registers window also has a Log Setup button for
access to the Register Log Scheduling window which allows you to setup a
log schedule for automatic start and stop of register logging. See “Logging Measurement Data” on page 6-12 for more information.
access to the Register Log Scheduling window which allows you to setup a
log schedule for automatic start and stop of register logging. See “Logging Measurement Data” on page 6-12 for more information.
Preliminary