Powerwave Technologies Inc. 5JS0109 Manuale Utente

044-05311 Rev A

3-1

This chapter contains unpacking and inspection, and mounting installation instructions for powering up the 

Nexus RT.

Powerwave recommends that a site survey be performed prior to ordering or installing equipment. Performing 

a detailed site survey reduces or eliminates installation and turn-up delays. Pay particular attention to power 

plant capacity, cooling needs, floor space, and RF/DC cabling/breaker requirements. Cabinet dimensions and 

weights are listed in Chapter 5.

This equipment has been operated, tested, and calibrated at the factory. Carefully open containers to remove 

equipment. Retain all packing material that can be reassembled in the event unit must be returned to the 

factory. Perform the following steps:

❑     Visually inspect equipment for damage that may have occurred during shipment. If possible, in the 

presence of the delivery person.

❑     Check for evidence of water damage, bent or warped chassis, loose screws or nuts, or extraneous 

packing material in connectors.

If any equipment is damaged, file a claim with the carrier once the extent of any damage is assessed.
If any equipment must be returned to factory, please contact the factory for a Return Material Authorization 

(RMA). See Chapter 4.

The Nexus RT is designed with a weatherproof outdoor cabinet. The unit can also be installed indoors. A 

preferable site for the Nexus RT is a location free of obstructions, easily accessible, and that allows for proper 

air-flow and ventilation.
A Sunshield is available for situations where the Nexus RT is installed outdoors and can be exposed to direct 

sunlight. It is essential that air circulates around the Nexus RT with no obstacles. The operating temperature 

must not exceed 55°C (131°F).
Never open a Nexus RT when rain, snow, hail, high humidity or high winds are present unless some kind of 

temporary shelter can be erected.