Powerwave Technologies Inc. 5JS0109 Manuale Utente

Connectors

Nexus RT

2-2

044-05311 Rev A

Figure 2-2 and Table 2-2 describe the connectors available on the Nexus RT repeater.

Figure 2-2   Nexus RT Connectors

CAUTION: All connectors are located on the bottom face of the repeater.To avoid damaging the connec-
tors, do not set the set the repeater down on the connector side.

There are different versions of Contol Unit (CU) Printed Circuit Board Assembly (PCBA) software which can 
be combined with PCBAs of various revisions. These have unique part numbers and revision information. 
Table 2-3 lists the software currently available in combination with CU PCBA revisions.

Table 2-3  Hardware / Software Compatibility

This information is accurate as of 06/31/2007. As new versions of hardware and software are released without 
prior notice, contact your Powerwave sales representative for information on the latest revision.
For detailed information, refer to the release notes for the CU software to be downloaded (normally found in 
the readme.txt file provided with the program files).

Table 2-2  Nexus RT Connectors

DNR ANT 850 MHz 

 

SRV ANT 850 MHz

Type N Female

Connectors for receive/transmit signals in 850 MHz

DNR ANT 1900 MHz

 

SRV ANT 1900 MHz

Type N Female

Connectors for receive/transmit signals in 1900 MHz

POWER

Circular DIN

Main power connector

LOCAL and WAN

RJ-45

Connectors for repeater control and status

RS-232

Circular DIN

Factory use only

ALARM

Circular DIN

Connector for alarm signals external to the repeater

500-13817-001 (previously K103/3)

D631-18072-001
D631-18072-003