Powerwave Technologies Inc. 5JS0109 Manuale Utente
Commissioning
Nexus RT
3-6
044-05311 Rev A
Commissioning
Before proceeding, carefully read the Safety section and check all connections made during the installation.
To fulfill the IP65 weather protective requirements, ensure cable strain relief bushings are properly tightened.
Also, ensure the gaskets at cable inlets and on the cabinet are properly fitted and not damaged.
Initial Startup
To complete the initial start-up of the Nexus RT, follow the steps listed below.
1. Turn on the main power. All LEDs will light up.
2. After about five seconds, check the PWR LED. If it shows green and steady, the Nexus RT is functioning
1. Turn on the main power. All LEDs will light up.
2. After about five seconds, check the PWR LED. If it shows green and steady, the Nexus RT is functioning
correctly.
Configure the Nexus RT
The Nexus RT can be configured locally with the built-in web terminal interface. Connect a standard Ethernet
cable from the RJ45 socket on a PC to the LOCAL connector located on the bottom of the cabinet as shown
Figure 3-7 Connection for Local Access
Log in
Follow these steps to access the Nexus RT interface pages.
1. Open a web browser on your PC.
2. Enter the IP address of the LOCAL port on the Nexus RT (192.168.47.10) in the URL address field and
1. Open a web browser on your PC.
2. Enter the IP address of the LOCAL port on the Nexus RT (192.168.47.10) in the URL address field and
press Return. The login dialog box, as shown in Figure 3-8, displays.
Figure 3-8 Nexus Web Terminal Login Screen