Lg Electronics LST200 Manuale Utente
LGIC CDMA Fixed Wireless Terminal
LST-200/2200
18
3. Press “*” to store.
Operation
1. Make a speed dial function enable.
2. Lift handset and dial tone will be heard.
3. Press speed dial number and wait for dial timeout or press “ #” .
Emergency Call
LST-200/2200 has 3 emergency call numbers (1~3) and max. 32 digits can be stored in each
emergency call number.
emergency call number.
Entering the emergency phone number
1. Press “#”+”#”+”2” continuously to enter emergency call programming mode.
2. Press “#” and one of the emergency memory location numbers (1~3).
3. Press “#” and the phone number (Max. 32 digits).
4. Press “*” to save and enable this function.
Enable or Disable emergency call
1. Press “#”+”#”+”2” continuously to enter emergency call programming mode.
2. Press “#” and Enable code (“ 1” ) or Disable code (“ 2” ).
3. Press “*” to save.
If Emergency Call is disabled and Emergency Call number has been already
programmed, you can make enable Emergency Call by pressing “#’ +”#”+”2”+”#”
+ ”1”+”*” without entering a emergency call number again.
programmed, you can make enable Emergency Call by pressing “#’ +”#”+”2”+”#”
+ ”1”+”*” without entering a emergency call number again.
Hot Line
While the Hot line function is enabled, the programmed number will be automatically dialed
when you pick up the handset and wait for the programmed hot line time (1~10sec) without
any key press.
when you pick up the handset and wait for the programmed hot line time (1~10sec) without
any key press.
Programming the Hot Line number
1. Press “#”+”#”+”3” continuously to enter Hot Line programming mode.
2. Press “#” and Hot Line Enable code “ 1” .
3. Press “#” and Hot Line phone number (Max. 32 digits).
4. Press “*” to save and enable this function.
Enable the Hot Line Feature
1. Press “#”+”#”+”3” continuously to enter Hot Line programming mode.
2. Press “#” and Hot Line Enable code “ 1” .