Lg Electronics LST200 Manuale Utente
LGIC CDMA Fixed Wireless Terminal
LST-200/2200
20
If Alarm is disabled and time has been already programmed, you can make enable
Alarm feature by pressing “#’ +”#”+”4”+”#”+”1”+”*” without entering alarm time again.
Alarm feature by pressing “#’ +”#”+”4”+”#”+”1”+”*” without entering alarm time again.
Volume Level
There are three voice volume levels to be controlled by software, and you can set the level to
the adequate conversation volume.
the adequate conversation volume.
Changing the Volume Level
1. Press “#”+”#”+”5” continuously to enter Volume Level programming mode.
2. Press “#” and Volume Level (1~3).
“1” – LOW Level
“2” – MIDDLE Level
“3” – HIGH Level
3. Press “*” to save.
Before pressing “*”, you can enter volume level continuously.
Outgoing Call Lock
If you try to make an outgoing call while outgoing call lock is enabled, then you will hear
warning tone after pressing “ #” or dial time-out as a indication of entering the LOCK code. You
should enter LOCK code to make an outgoing call. LOCK code is composed of 4 digits and
the initial setting is “0000” . Outgoing Call Lock feature is disabled as a factory setting.
warning tone after pressing “ #” or dial time-out as a indication of entering the LOCK code. You
should enter LOCK code to make an outgoing call. LOCK code is composed of 4 digits and
the initial setting is “0000” . Outgoing Call Lock feature is disabled as a factory setting.
Enable or Disable Outgoing Call Lock
1. Press “#”+”#”+”6”+LOCK code continuously to enter Outgoing Call Lock programming
mode.
2. Press “#” and Enable (“1” ) or Disable (“ 2” ) code.
3. Press “*” to save.
Changing Outgoing LOCK Code
1. Press “#”+”#”+”6”+LOCK code continuously to enter Outgoing Call Lock programming
mode.
2. Press “#” and “3” to change LOCK code.
3. Press “#” and 4 digits of LOCK code to be changed.
4. Press “#” and new LOCK code.
5. Press “*” to save.