Lg Electronics LST200 Manuale Utente
LGIC CDMA Fixed Wireless Terminal
LST-200/2200
21
G3 FAX Receive Mode
To receive a Data Fax call by G3 FAX connected to your LST-200/2200 terminal from the
other devices (Land or Mobile Data Fax), your service provider should support wireless data
FAX. And the LST-200/2200 mode should be changed to G3 FAX receive mode to change
data path from RS-232C to G3 FAX machine. Even if FAX data path is changed to G3 FAX
machine, you can make an outgoing call from your single line telephone and make a FAX
outgoing call from G3 FAX. But receiving call is ringing to G3 FAX machine even if the caller
is not FAX because the terminal doesn’ t recognize the call is for FAX or voice. Following is
the procedure to change data path and default data path is RS-232C data path.
other devices (Land or Mobile Data Fax), your service provider should support wireless data
FAX. And the LST-200/2200 mode should be changed to G3 FAX receive mode to change
data path from RS-232C to G3 FAX machine. Even if FAX data path is changed to G3 FAX
machine, you can make an outgoing call from your single line telephone and make a FAX
outgoing call from G3 FAX. But receiving call is ringing to G3 FAX machine even if the caller
is not FAX because the terminal doesn’ t recognize the call is for FAX or voice. Following is
the procedure to change data path and default data path is RS-232C data path.
Enable or Disable G3 FAX Receive mode
1. Press “#”+”#”+”7” continuously to enter G3 FAX Receive programming mode.
2. Press “#” and Enable (“1” ) or Disable (“ 2” ) code.
Enable means that Data call path is changed to G3 FAX.
Disable means that Data call path is changed to RS-232C. (Default mode)
3. Press “*” to save.