TransCore 05939 Manuale Utente
Choosing, Installing, and Removing Tags
3-23
Figure 3-23 Correct Exterior Tag Placement
2.
Line up the holes in the tag as follows:
•
If mounting the tag to a license plate or license plate bracket, line up the
holes in the tag to the upper holes of the license plate or license plate
bracket.
holes in the tag to the upper holes of the license plate or license plate
bracket.
Note: Do not mount the tag to the bottom holes of the license plate or license
plate bracket. The reflective material on the license plate may interfere with the
proper functioning of the tag.
plate bracket. The reflective material on the license plate may interfere with the
proper functioning of the tag.
•
If mounting the tag to the bumper, line up the holes in the tag with the holes
in the front bumper where the license plate would normally be located.
See
in the front bumper where the license plate would normally be located.
See
.
3.
Insert bolts through the tag base plate holes and the holes in the bumper or the
holes in the upper portion of the license plate area. See
holes in the upper portion of the license plate area. See
.