Toshiba TEC Corporation GN1050 Manuale Utente
1. Setting Up Wireless Network
16
GN-10
50 Operator’s Manual — Setting Up the Infrastructure Mode
Specify SSID
When you select the Infrastructure Mode for the Network Type, you can specify the
SSID by selecting the available network list or manually entering the SSID.
SSID by selecting the available network list or manually entering the SSID.
NOTE:
If you are not sure how the SSID must be specified, see the following section to deter-
mine the SSID.
mine the SSID.
Selecting the SSID from the available network list
This equipment can search the available SSID automatically from the wireless network.
Then you can select the SSID from the list.
Then you can select the SSID from the list.
1.
Press the [AVAILABLE NETWORK] button.
•
The AVAILABLE NETWORK screen is displayed.
2.
Select the SSID that this equipment will connect and press
the [ENTER] button.
the [ENTER] button.
•
The screen returns to the SSID SETTINGS screen.
NOTES:
•
The available network may not displayed according to the communication environ-
mental conditions.
mental conditions.
•
•
This Wireless LAN supports only channel 1 to 11. This equipment cannot connect
the Access Point that uses the other channel than these channels. Please make
sure to set the channel between 1 to 11 in the Access Point.
the Access Point that uses the other channel than these channels. Please make
sure to set the channel between 1 to 11 in the Access Point.