GatesAir Inc. UAXDVF Manuale Utente
2-4
888-2711-001
2/9/10
WARNING: Disconnect primary power prior to servicing.
Section 2 Installation / Initial Turn-On
Maxiva UAX Transmitter Outdoor Enclosure System
User Manual
2.4
Cabinet Attachments
The enclosure is equipped with three (3) threaded antenna mounts located on the
bracket that is attached to the side of the transmitter cabinet directly above the air
conditioner cabinet. See Figure 2-3. The 2 GPS antenna supports screw into any two (2)
of these mounts.
bracket that is attached to the side of the transmitter cabinet directly above the air
conditioner cabinet. See Figure 2-3. The 2 GPS antenna supports screw into any two (2)
of these mounts.
STEP 1
Install the two mounts and GPS antennas. Tighten the mounts down
securely.
STEP 2
Feed the antenna wires through the moisture proof barrier under the
bracket close to the back of the transmitter. Figure 2-4. They connect to
the GPS surge suppressors. See Figure 1-7 on page 1-8.
the GPS surge suppressors. See Figure 1-7 on page 1-8.
Figure 2-3 GPS Antenna Mount