Honeywell International Inc. 8DLLYNXREN-5 Manuale Utente
–25–
Data Field Descriptions
✻
92
Swinger Shutdown
1 = shutdown after one trip
2 = shutdown after two trips
This option is used to define number of trips for non-fire zones after which
the control ignores subsequent trips of the zone. The zone swinger counter
is reset after the zone alarm is erased from alarm memory (after two
CODE + OFF).
Note: The control validates the data entered in this field. If the selection
the control ignores subsequent trips of the zone. The zone swinger counter
is reset after the zone alarm is erased from alarm memory (after two
CODE + OFF).
Note: The control validates the data entered in this field. If the selection
is not valid the control will emit a single long beep indicating that
the selection has been rejected. The control replaces the selection
with the default value which is displayed on the keypad.
the selection has been rejected. The control replaces the selection
with the default value which is displayed on the keypad.
✻
93
Flexible Callback
0 = no flexible callback
1 = last digit flexible
2 = last 2 digits flexible
3 = last 3 digits flexible
If enabled, the control will ignore the last 1, 2, or 3 digits of the
programmed callback number (field
programmed callback number (field
✻
94) during a single download session.
This allows the download operator to temporarily change the callback
phone number by the number of digits selected, which allows the control to
call back similar, but different numbers during a single session. For
example, if downloading to a large number of controls, the operator can
command the controls to call back phone numbers 555-1111, 555-1112, 555-
1113, etc., thus spreading the communications among several computers.
phone number by the number of digits selected, which allows the control to
call back similar, but different numbers during a single session. For
example, if downloading to a large number of controls, the operator can
command the controls to call back phone numbers 555-1111, 555-1112, 555-
1113, etc., thus spreading the communications among several computers.
DOWNLOAD INFORMATION (
✻
94,
✻
95)
✻
94
Download Call Back Phone Number
Enter up to 20 digits as follows: 0–9, # +11 for “
*
”, # +
12 for “#”, # + 13 for a pause.
This is the phone number the control will use to call back the downloading
computer.
Do not fill unused spaces. End field by pressing
computer.
Do not fill unused spaces. End field by pressing
✻
. To clear entries from
field, press
✻
94
✻
.
✻
95
Ring Detection Count For Downloading/
Remote Phone Control
Remote Phone Control
0 = disable station initiated download and remote
phone
1-14 = number of rings before control picks up phone
line
15 = defeat answering machine
Enter “15” to select defeat answering machine mode. If an
answering machine is on the premises, you need to dial the
premises and hang up on the first ring. Wait at least five (5)
seconds (but no more than 22 seconds) and dial the premises
phone number again. The control will pick up and announce
“SYSTEM ENTER CODE” every three seconds.
answering machine is on the premises, you need to dial the
premises and hang up on the first ring. Wait at least five (5)
seconds (but no more than 22 seconds) and dial the premises
phone number again. The control will pick up and announce
“SYSTEM ENTER CODE” every three seconds.
Note: To enter a number higher than 9 you must first press the [#] key.