UTC Fire & Security B.V. ATS111X Manuale Utente

5

  AL-111X Arming Station

The AL-111X Series has a number of options that are programmable at the time of installation to help integrate the keypad
into the local environment.

In particular, the AL-1115 and AL-1116 RAS are fitted with a Smart Card reader. If used in the default “secure” mode, the
reader must be configured via a reader configuration card before it can be used. The reader configuration card must be
programmed using the Alliance software management application in conjunction with a TS0870P Smart Card Programmer.

The setting for the Smart Card reader can be changed to “unsecured” via menu option 7-Security Mode, in which case the
card’s unique serial number is used. Unsecured mode requires the use of an expanded memory (IUM-equipped) system.

The programming menu of the AL-111X Series RAS is structured into two sections:

•

Menus 1 to 6 are common to all AL-111X Series RAS.

•

Menus 7 to 12 apply only to AL-1115 and AL-1116 RAS (with Smart Card reader).

The AL-111X Series menu system works in the same manner as all other remote units on the System BUS.

1.

With all areas disarmed, press [*MENU], [installer code], [ENTER#].

2.

Press [19], [ENTER#], [*MENU], [28], [ENTER#].

3.

Press [2], [ENTER#] to access the RAS menu.

4.

Press [RAS address], [ENTER#].

5.

You are now in the RAS main menu, and the text displays similar to the following:

(111x is the product name and Vxx is the firmware revision number)

The navigation sequence varies depending on where you are in the menu hierarchy. The main menu is used in the following
manner:

•

Press [ENTER#] to scroll forward through the main menu options. Press [*MENU] to scroll backward through the
main menu options.

•

Each menu option has an associated option number. To select a menu option and open its sub-menu, press [option
number], [ENTER#].

•

Press [0, -&], to exit the RAS main menu.

Sub-menus typically offer a choice between two options, a default setting and an alternative setting. Sub-menus are used in
the following manner:

•

Press [ENTER#] to accept the currently displayed setting and to return to the main menu.

•

Press [*MENU] to select the alternative setting.