Sennheiser Electronic Corp G3SKP300 Manuale Utente
18 |
SKP 300 G3
Adjusting settings via the operating menu
Selecting the frequency bank and the channel
manually – “Frequency Preset”
manually – “Frequency Preset”
Overview of the frequency banks and channels:
Entering a name – “Name”
Via the “
Name
” menu, you can enter a freely selectable
name for the plug-on transmitter. The name can be
displayed on the standard displays “
displayed on the standard displays “
Frequency/Name
”
and “
Name/Channel
” (see page 13) and can consist of
up to 8 characters such as:
•
letters (without pronounciation marks),
•
numbers from 0 to 9,
•
special characters and spaces.
To enter a name, proceed as follows:
When you are in the “
Frequency Preset
” menu
item, the RF signal is deactivated.
Frequency bank
Channels
Type
“
1
” to “
20
”
up to 24 per
frequency
bank
frequency
bank
System bank:
frequencies are
factory-preset
frequencies are
factory-preset
“
U1
” to “
U6
”
up to 24 per
frequency
bank
frequency
bank
User bank:
frequencies are
freely selectable
frequencies are
freely selectable
When setting up multi-channel systems, please
observe the following:
observe the following:
Only the factory-preset transmission frequencies
within one frequency bank (“
within one frequency bank (“
1
” to “
20
”) are inter-
modulation-free. It is vital to observe the notes on
frequency selection on page 23.
frequency selection on page 23.
왘
Press the UP/DOWN button to select a
character.
character.
왘
Press the
SET
button to change to the next
segment/character or to store the complete
entry.
entry.
Menu
B.Ch: 18.24
Frequency Preset
B.Ch:
546.550MHz
Frequency Preset
18
.24
B.Ch:
Frequency Preset
19.
24
Call up “Frequency
Preset”
Preset”
Select the frequency
bank and confirm
bank and confirm
Select the channel;
store the setting
store the setting
“Stored”
538.475MHz
Call up “Name”
Enter a character
and confirm
Enter a character;
store the setting
Menu
L i c h a e l
Name
Name
Name
L
i c h a e l
M
i
chael
“Stored”
SET