Sennheiser Electronic Corp G3SKP300 Manuale Utente
SKP 300 G3
| 19
Adjusting settings via the operating menu
Activating/deactivating the automatic lock mode –
“Auto Lock”
“Auto Lock”
The lock mode prevents that the plug-on transmitter is
accidentally switched off or programed during opera-
tion. The lock mode icon
accidentally switched off or programed during opera-
tion. The lock mode icon
5
on the current standard
display indicates that the lock mode is activated.
For information on how to use the lock mode, refer to
page 11.
page 11.
The extended menu “
Advanced Menu
”
Setting the transmission frequencies for the frequency
banks “U1” to “U6” – “Tune”
banks “U1” to “U6” – “Tune”
Via the “
Tune
” menu item, you can:
1. set a transmission frequency to be stored in the
current channel of the frequency bank (“
U1
” to “
U6
”)
2.
or
select a frequency bank (“
U1
” to “
U6
”) and a
channel and assign this channel a transmission
frequency.
frequency.
왘
Press the UP/DOWN to select the desired
setting.
setting.
When you have selected one of the system banks
and then select the “
and then select the “
Tune
” menu item, the plug-on
transmitter automatically switches to channel 1 of
the frequency bank “
the frequency bank “
U1
”. In this case, “
U1.1
”
briefly appears on the display panel.
Upon delivery, the channels of the frequency
banks “
banks “
U1
” to “
U6
” are not assigned a transmis-
sion frequency.
When you are in the “
Tune
” menu item, the RF
signal is deactivated.
It is vital to observe the notes on frequency selec-
tion on page 23.
tion on page 23.
Call up
“Auto Lock”
“Auto Lock”
Select the
desired setting
desired setting
A c t i v e
Auto Lock
Active
Auto Lock
I n a c t i v e
Auto Lock
Menu
Store the setting
“Stored”