Sennheiser Electronic Corp SK5212A2 Manuale Utente
Adjustment tips for the operating menu
24
Adjusting the bass roll-off frequency – “
LOWCUT
”
To reduce unwanted low-frequency noise such as wind and handling noise, you can activate a
low-cut filter. The low-cut frequency is 120 Hz.
low-cut filter. The low-cut frequency is 120 Hz.
If you do not want to reduce low-frequency signal portions, select the setting “
FLAT
”.
Selecting the standard display – “
VIEW
”
Via the “
VIEW
” menu, you can select one of the following standard displays:
The selected standard display is shown
•
after switch-on,
•
after the menu settings have been displayed for 10 seconds in display mode.
Loading the factory-preset default settings – “
RESET
”
Via the “
RESET
” menu, you can load the factory-preset default settings. After the reset, the
standard display is shown on the LC display panel.
Transmission
frequency “
frequency “
FREQ
”
Channel
“
“
CHAN
”
Name
“
“
NAME
”
Function
Setting
Low-cut frequency
“
FLAT
”
Microphone sensitivity
“
0 dB
”
Name
“
SK5212
”
Standard display
Transmission frequency
Autolock function
deactivated
Channel
“
FIX 01
”
Output power
“
PWR.HI
”
Frequencies in the frequency bank “
VAR
” are reset.
RF
MHz
CH
CH
RF
RF
SK 5212-II_535300_0909_Sp7.book Seite 24 Dienstag, 22. September 2009 4:07 16