Whetron Industrial Co Ltd 0001 Manuale Utente
FCC ID: DPB-0001
3、ECU Function Description：
3.1. Code Learning：
A). On the DISARM status:
1). Anyone of the four doors open, Key in cylinder
2). IGN ON→OFF 5 times within 10 sec.
3). LED kept lightened
2). IGN ON→OFF 5 times within 10 sec.
3). LED kept lightened
B). Finished steps A), LED remains lighting, push any bottom in the first transmitter once
within 16 sec, LED OFF, then push the same bottom in the first transmitter again ,LED
flash once then kept lighten means code learning succeeded.
flash once then kept lighten means code learning succeeded.
C). To learn the second code you must repeat B) within 16 sec after the first code learning
succeeded.
D). Closed the door, IGN turn on or no signal of the transmitter within 16 sec then the LED
turn OFF, it means leave the code learning mode.
E). 4 sets of code are available in memory.
3.2. Security Status ARM：
A). After IGN OFF, all doors / trunk / hood closed, pushed the LOCK button and then siren
chirped once (0.15sec) flasher twinkled once, four doors locked simultaneously; system
accessed ARM status and security LED twinkled slowly after 3 seconds.
accessed ARM status and security LED twinkled slowly after 3 seconds.
B). Setting Failure: Siren chirped long once (1.0sec) for ARM Failure, if doors at status of
OPEN.
C). IF door is closed and trunk/hood is not closed, the door lock is locked, however, system
doesn’t access ARM status with keeping security LED lighting
D). After that, trunk/hood is closed, system accessed ARM status automatically and security
LED twinkled slowly after 3 seconds.
3.3. Security Status DISARM：
UNLOCK button pushed, doors unlocked and flasher twinkled two times and siren chirped
two times and interior light ON for 30 seconds. System accessed the DISARM status.
If system triggered before, flasher twinkled three times and siren chirped three times. Then
security LED twinkled speedily.
two times and interior light ON for 30 seconds. System accessed the DISARM status.
If system triggered before, flasher twinkled three times and siren chirped three times. Then
security LED twinkled speedily.
3.4. SEARCHING：
Under ARM status, pushed LOCK button once. Siren chirped once (1.5sec) and flasher
twinkled for (15secs).
twinkled for (15secs).
3.5. Mute setting：
A). Pushed UNLOCK and PANIC once at the same time, sound of ARM
/DISARM/SEARCHING disable
B). Within 3 sec. pushing UNLOCK and PANIC twice, Siren will chirp once, sound of
LOCK and UNLOCK will be enable