Whetron Industrial Co Ltd 0001 Manuale Utente
FCC ID: DPB-0001
3、ECU Function Description：
3.11. RE-ARMING：
Pushed UNLOCK button on TX but without IGN ON/KEY IN/ Door /Hood/ Trunk opened
within 30 sec. System accessed ARM status automatically with siren chirped once and flasher
twinkled once, and doors locked.
within 30 sec. System accessed ARM status automatically with siren chirped once and flasher
twinkled once, and doors locked.
3.12. Automatic Arming：(Selectable; initial is “OFF”)
30 seconds after IGN OFF and KEY OUT, system accessed ARM status automatically.
If door, trunk or hood opened within 30 seconds, system delayed another 30sec. to ARM after
door, trunk, hood closed. (doors don’t lock)
If door, trunk or hood opened within 30 seconds, system delayed another 30sec. to ARM after
door, trunk, hood closed. (doors don’t lock)
3.13. Auto-Lock over the speed 20 ㎞/H：
Under Door closed, IGN ON status, doors closed and over-speed 20km/hr. Then doors locked
automatically. When IGN OFF , doors unlocked automatically.
automatically. When IGN OFF , doors unlocked automatically.
3.14. Interior Lights ON：
A). Pushed UNLOCK button on TX, doors unlocked and interior lights ON for 30sec.;
B). Within the 30 sec. of interior light ON status, interior light will be OFF immediately
B). Within the 30 sec. of interior light ON status, interior light will be OFF immediately
when IGN ON. (Selectable)
C). Under DISARM status, door opened and interior light ON. After 30 sec. , interior light
OFF. (Selectable)
3.15. LED indicators：
A). LED twinkled slowly under ARM status.
B). LED twinkled speedily after vibrated or system activated. LED stopped after IGN ON.
C). LED stopped twinkle on accessing DISARM status if system not being activated.
D). After 3 sec accessed intrusion sensor status, LED will light continuously for 3 sec.
E). If hood or trunk opened when pushing LOCK button, LED kept lightened. After hood or
B). LED twinkled speedily after vibrated or system activated. LED stopped after IGN ON.
C). LED stopped twinkle on accessing DISARM status if system not being activated.
D). After 3 sec accessed intrusion sensor status, LED will light continuously for 3 sec.
E). If hood or trunk opened when pushing LOCK button, LED kept lightened. After hood or
trunk closed, system accessed ARM status automatically and security LED twinkled
slowly after 3 seconds.
slowly after 3 seconds.
F). In case of the vehicle with the immobilizer system, there is an indicator only for the
immobilizer. So, the indication of A)~D) is not available.
3.16. Transmitter disabled Condition：
When IGN ON or KEY IN status, ARM, DISARM, SEARCHING and Remote Trunk
Opening will be disable.
3.17. Status and Alarm Memory：
A).Under arming status , power OFF then ON, Activation
B). During the cycle of alarming, power OFF then ON, system is on alarming status
C). Under “Disarming “ status, power OFF then ON, system restored “Disarming status
B). During the cycle of alarming, power OFF then ON, system is on alarming status
C). Under “Disarming “ status, power OFF then ON, system restored “Disarming status
.