Uniden America Corporation UB361 Manuale Utente
ProgrammingLocations < UnidenMan4 < TWiki
with the geographic coordinates you want to use for each site or channel group. You can also
program your scanner to alert you when you approach particular locations.
program your scanner to alert you when you approach particular locations.
●
●
●
❍
❍
❍
Programming a location for a site
Each system site can have separate location information.
1. Open the
menu.
2. Select the system you want to program for location based scanning.
3. Select
3. Select
4. Select the
menu and enter the latitude, longitude, and range for this site.
5. Change the Set GPS Enable field to On .
6. Go back to the
6. Go back to the
menu and repeat these steps with any other sites you want to
program for this system.
Programming a location for a channel group
Each channel group in a system can have separate location information.
1. Open the
menu.
2. Select the system you want to program for location based scanning.
3. Select
3. Select
4. Select the
menu and enter the latitude, longitude, and range for this site.
5. Change the Set GPS Enable field to On .
6. Go back to the
6. Go back to the
menu and repeat these steps with any other sites you want to
program for this system.
Remember: You have to turn on Set GPS Enable before the location information
file:///C|/Documents%20and%20Settings/POpitz/My%20D...emp/CDImage_090515/Manual/ProgrammingLocations.html (1 of 3)5/26/2009 11:12:36 AM