Sharp Corporation TCG039 Manuale Utente

Dimensions: 257 

2 182 mm

Printelligence (Malaysia) Sdn. Bhd.

V C - H 8 1 8 U   ( 3 1 - 3 4 )

∂

ƒ

$ The timer program information is shown on the TV screen.

Check the contents.

• If the channel displayed is incorrect, select the CH

position with ß/© and correct it with ∂/ƒ.

• When recording a program on a channel for the first

time, you must enter the correct channel number on the
screen, otherwise the PlusCode number will not be
successfully decoded.

% Select the tape speed with ∂/ƒ if necessary.

Ex.: SP

^ Press 

. To program additional timer settings, repeat

Steps @ to ^.

& Press 

.

The display shown to the left appears on the screen for 5
seconds, then the normal screen returns.

* Press 

 to enter the timer standby mode.

Be sure that “TIMER” is lit up on the multi-function display.

g

g

• If you select “DAILY” in Step #, the VCR will record the program Monday–Sunday at the same time.

If you want to record Monday–Friday or Monday–Saturday, select “DATE” with ß/ © and change it to “MO-FR” or “MO-SA”
with ∂/ƒ in Step $.

• In Step $, input the channel number you want to record. Once the preset channel has been input, you will not need to set

the preset channel for that station again.

• In Step #, if the VCR cannot decode the PlusCode number, or if the combination of PlusCode number and Program mode

does not exist, then “ERROR” will appear as shown below. To correct, press 

 and re-enter the PlusCode number.

1: PlusCode number entered is invalid.
2: Channel number is invalid.

(Used in cases when, even though the VCR TV mode on the CHANNEL PRESET screen is
set to AIR, the decoded channel number is greater than 69.)

3: PlusCode number entered for a program that has already been shown.
• You can also enter the VCR Plus+ system setting screen by selecting “VCR PLUS+” on

MENU  screen.

• If you press 

 or select “VCR PLUS+” on MENU screen when the VCR clock

has not been set, the CLOCK screen will initially appear.

Use the method described in 

 to confirm or cancel program data.

g

g

TIMER

g

©