Harris Corporation RF Communications Division XG-100LPA Manuale Utente
14221-1200-4010, Rev. B
56
10.2 GENERAL INFORMATION ON THE CH-100 CONTROL HEAD
The CH-100 control head features a 4.3-inch touchscreen high-contrast sunlight-readable LCD color
display, providing an easy-to-use menu-driven operator interface. This head also features a Bluetooth
®
wireless interface for connection of optional equipment and to support radio and control head
programming via a wireless connection. The front panel of the CH-100 head also features an easy-to-use
on/off/volume control and group/channel selection controls, an emergency button, a home button, a USB
programming port, a transmit/receive busy indicator, and a microphone connector.
Figure 10-1: CH-100 Control Head Front Panel
Figure 10-2: CH-100 Control Head Rear Panel (shown with Standard Mounting Bracket)
The CH-100 control head’s mounting bracket allows pitch-axis (tilt) positioning for best viewing angle.
Pitch adjustments are accomplished by loosening thumbscrews on each side of the bracket, changing the
pitch/tilt of the head as needed, and then retightening the thumbscrews. A 150-degree pitch/tilt angle is
provided.
On/Off/Volume
Control
System/Group/-
Channel Selection
Control
Ambient Light
Level Sensor
4.3-Inch LCD Touchscreen Color Display
Emergency Button
Home Button
USB Programming
Port
Microphone
Connector
CAN Port
Connectors
(2 places)
Speaker Audio
Connector
Serial Port Connector
(Female DB-9)
DC Power
Connector
Accessory Connector
(Female DB-25)
Socket-
Head Cap
Screws
(2 places)
Standard
Mounting
Bracket
Note: Serial Port
and Accessory
connectors
are shown without
waterproof covers.
Built-In
Microphone for
Noise-
Suppression