Telrad Networks Ltd COMPACT23X Manuale Utente

Chapter 2 - CommissioningActivating the Unit

Chapter 2: Commissioning

Activating the Unit

BreezeCOMPACT System Manual

BreezeCOMPACT System Manual

Define Antenna Associations.

After properly completing the steps above, the unit will start operating using default values for all other parameters. 

Additional parameters should be configured according to Radio Network Planning (RNP) guidelines and other instructions 

provided by the System Administrator.

This section includes the following sub-sections:









Select BS > Add. You are prompted to configure the following mandatory parameters:



BS Number (must be 1)



BS ID LSB (must be unique in the Radio Access Network)



Operator ID



Cell ID



Segment Number



Total Uplink Duration



Basic Map Repetition



DL Data Permutation Base



UL Feedback zone Permutation base



UL Data Permutation Base



Bearer IP Address



Paging Group ID (if other than 0, should be unique in the Radio Access Network)

Refer to 

 for details about these parameters.

Right-click the BS node in the navigation tree and select Create to open the New BS window. In the current release, only 

the BS Number 1 option is available for BS Number. Configure the following parameters:



BS ID LSB: Must be unique in the Radio Access Network.



Operator ID: The default is 255.243.41. The same Operator ID should be used for all BSs in the Radio Access 

Network.