Nokia of America Corporation BBTRX-10A Manuale Utente
Attach 9764 MCO Wi-Fi AP module to 9764 MCO module
NOTICE
ESD hazard
Semiconductor devices can be damaged by electrostatic discharges (ESD)
The following rules must be complied with when handling any module containing
semiconductor components:
• Wear conductive or antistatic working clothes (for example, coat made of 100%
semiconductor components:
• Wear conductive or antistatic working clothes (for example, coat made of 100%
cotton).
• Wear a grounded wrist strap.
• Wear shoes with conductive soles on a conductive floor surface or conductive work
• Wear shoes with conductive soles on a conductive floor surface or conductive work
mat.
• Leave the modules in their original packaging until ready for use.
• Make sure there is no difference in potential between yourself, the workplace, and the
• Make sure there is no difference in potential between yourself, the workplace, and the
packaging before removing, unpacking, or packing a module.
• Whenever handling ESD-sensitive components, do not touch any connection pins or
tracks.
• Place modules removed from the equipment on a conductive surface.
• Test or handle the module only with grounded tools on grounded equipment.
• Handle defective modules exactly like new ones to avoid causing further damage.
Perform the following steps to attach the 9764 MCO Wi-Fi AP module to the 9764 MCO
module:
• Test or handle the module only with grounded tools on grounded equipment.
• Handle defective modules exactly like new ones to avoid causing further damage.
Perform the following steps to attach the 9764 MCO Wi-Fi AP module to the 9764 MCO
module:
...................................................................................................................................................................................................
1
Remove the 9764 MCO Wi-Fi AP module from its packaging.
...................................................................................................................................................................................................
2
Using a T10 Torx screwdriver, remove the cover over the Wi-Fi AP connector on the
lower back of the 9764 MCO module by unscrewing the three screws.
lower back of the 9764 MCO module by unscrewing the three screws.
The following figure shows the Wi-Fi AP connector cover:
Installation of the 9764 MCO Wi-Fi AP
Procedure 3-1: Attach 9764 MCO Wi-Fi AP module to 9764
MCO module
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
9764 MCO Wi-Fi AP
3MN-WiFi-AP
Issue 1.01
9764 MCO Wi-Fi AP
3MN-WiFi-AP
Issue 1.01
November 2013
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
3-3