Nokia of America Corporation BBTRX-10A Manuale Utente
Important! Ensure that the appropriate gasket surrounding the connector is in place
on the 9764 MCO module (as shown in
on the 9764 MCO module (as shown in
Note: Retain the cover and the three (3) cover screws. Should the need arise to
remove but not replace the 9764 MCO Wi-Fi AP module in the future, the dummy
cover and its screws must be reattached to the 9764 MCO module.
remove but not replace the 9764 MCO Wi-Fi AP module in the future, the dummy
cover and its screws must be reattached to the 9764 MCO module.
...................................................................................................................................................................................................
3
Push the 9764 MCO Wi-Fi AP module onto the Wi-Fi AP connector.
Figure 3-1 Wi-Fi AP connector cover on 9764 MCO module
Cover over 9764 MCO Wi-Fi AP connector
Figure 3-2 Wi-Fi AP connector on 9764 MCO module
Installation of the 9764 MCO Wi-Fi AP
Procedure 3-1: Attach 9764 MCO Wi-Fi AP module to 9764
MCO module
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-4
Alcatel-Lucent – Internal
Proprietary – Use pursuant to Company instruction
9764 MCO Wi-Fi AP
3MN-WiFi-AP
Issue 1.01
November 2013