Honeywell International Inc. WFSPS Manuale Utente
10
SWIFT® Smart Wireless Integrated Fire Technology Manual — P/N LS10036-000NF-E:E 11/9/2017
Section 2: FWSG FlashScan Wireless System Gateway
2.1 Description
The FWSG is a device in a wireless fire system that acts as a bridge between fire alarm control panels (FACPs) and wireless fire devices.
All wireless fire devices communicate with the gateway over the wireless network formed by the devices and the gateway.
The gateway is powered by either the SLC loop or by any external +24VDC UL listed power supply. The gateway uses the FlashScan
protocol on the SLC to communicate with the panel and a proprietary wireless protocol to communicate with wireless fire devices. The
following graphic is an illustration of the components of the SWIFT Network.
All wireless fire devices communicate with the gateway over the wireless network formed by the devices and the gateway.
The gateway is powered by either the SLC loop or by any external +24VDC UL listed power supply. The gateway uses the FlashScan
protocol on the SLC to communicate with the panel and a proprietary wireless protocol to communicate with wireless fire devices. The
following graphic is an illustration of the components of the SWIFT Network.
2.2 Agency Approvals
2.2.1 FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause undesired operation.
3.
FCC ID: PV3WFSGW
2.2.2 Industry Canada
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1.
1.
This device may not cause interference, and
2.
This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes:
1.
autorisée aux deux conditions suivantes:
1.
L'appareil ne doit pas produire de brouillage, et
2.
L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre
le fonctionnement.
IC: 12252A-WFSGW
2.2.3 Federal Institute of Telecommunications
This device utilizes the Honeywell915 rev A radio module and complies with IFETEL standard(s).
IFT: RCPHOSW14-1983
IFT: RCPHOSW14-1983
Figure 2.1 SWIFT Network
FACP
SLC
wired SLC devices
FWSG
Gateway
wireless mesh
network
SWIFT
Tools
USB adapter
!
WARNING: DO NOT MAKE CHANGES TO THE EQUIPMENT
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER’S
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.