Honeywell International Inc. WFSSD Manuale Utente
30
PRELIMINARY: Notifier Wireless Sensor Network — P/N LS10036-000NF-E:N0 10/10/2013
FWSG
Operations
7. Click Weak links troubles. The Report weak links troubles screen is displayed.
8. Click Turn off reporting.
The trouble reporting is disabled.
The trouble reporting is disabled.
Disabling Trouble Reporting in the Panel
To disable trouble reporting at the panel, refer to the manual for the NFS2-3030, part number
LS10006-051NF-E.
2.7.6 Collapse Network Command
The collapse command is a diagnostic function to break the mesh network. All devices will retain
the profile information but will be removed from the mesh. The mesh can be immediately
reformed by activating mesh formation.
CAUTION:
FIRE PROTECTION FROM WIRELESS DEVICES WILL BE LOST WHEN A
COLLAPSE COMMAND IS ISSUED.
The mesh network can be collapsed using the PC-based configuration tool or through the NFS2-
3030 panel.
Collapsing Mesh Network Using PC Tools
To collapse the mesh network using the PC based configuration tool, perform the following steps:
1. Connect the W-USB dongle device to your computer. For more information on USB dongle,
1. Connect the W-USB dongle device to your computer. For more information on USB dongle,
2. Launch the PC Tools application. Refer to Appendix B: "PC Tools" to know about launching
the PC Tools application.
3. Go to Diagnostics step.
4. Select a Gateway from the Communicator pane.
5. Click View Mesh. The mesh is displayed.
6. Click Advanced Functions
4. Select a Gateway from the Communicator pane.
5. Click View Mesh. The mesh is displayed.
6. Click Advanced Functions
on top of the mesh display. A drop-
down list is displayed.