Honeywell International Inc. WFSSD Manuale Utente
34
PRELIMINARY: Notifier Wireless Sensor Network — P/N LS10036-000NF-E:N0 10/10/2013
FWSG
Operations
2.7.10 Trouble States
NFS2-3030
NCA-2
Onyxworks
NFS2-640
NFS-320
Description
Course of Action
RADIO
JAMMING
JAMMING
JAM
Non-
latching
latching
The FWSG is being
overloaded with RF
energy and is unable to
receive messages from
other devices.
overloaded with RF
energy and is unable to
receive messages from
other devices.
Identify any RF emitters in
close proximity of the FWSG
and remove them, or relocate
the FWSG.
close proximity of the FWSG
and remove them, or relocate
the FWSG.
INCOMPAT
SOFT
SOFT
IN SFT
Non-
latching
latching
Software mismatch
between the application
code for the RF processor
and the SLC processor.
between the application
code for the RF processor
and the SLC processor.
Use PC Tools to identify the
mismatch, and update the
processors as necessary for
compatibility.
mismatch, and update the
processors as necessary for
compatibility.
MESH IS
FORMING
FORMING
MS FRM
Non-
latching
latching
The FWSG and attached
devices are searching for
additional devices to join
the mesh. The wireless
system is not able to
provide fire protection
during this time.
devices are searching for
additional devices to join
the mesh. The wireless
system is not able to
provide fire protection
during this time.
Wait until all desired wireless
devices are communicating
and members of the mesh
network. Once all desired
devices are in the mesh
network, the mesh forming
mode can be terminated by the
user by activating the Mesh
formation magnetic sensor or
by using the PC Tools. If no
action is taken, this mode will
automatically exit 10 minutes
after the last device joins.
devices are communicating
and members of the mesh
network. Once all desired
devices are in the mesh
network, the mesh forming
mode can be terminated by the
user by activating the Mesh
formation magnetic sensor or
by using the PC Tools. If no
action is taken, this mode will
automatically exit 10 minutes
after the last device joins.
MESH NOT
FORMED
FORMED
NO MESH
Non-
latching
latching
The FWSG contains a
profile but has not formed
a mesh.
profile but has not formed
a mesh.
To form a mesh, refer to
"Create Mesh Network".
"Create Mesh Network".
OPTIMIZING
MESH
MESH
OPT MS
Non-
latching
latching
The FWSG is performing
the initial identification
and assignment of
optimal communication
paths for the mesh
network. The wireless
system is not able to
provide fire protection
during this time.
the initial identification
and assignment of
optimal communication
paths for the mesh
network. The wireless
system is not able to
provide fire protection
during this time.
No action needed. The
duration of this event
correlates to the number of
devices in the mesh. A fully
loaded mesh may take up to 5
minutes to optimize.
duration of this event
correlates to the number of
devices in the mesh. A fully
loaded mesh may take up to 5
minutes to optimize.
PROFILE
MISSING
MISSING
PR MIS
Non-
latching
latching
The FWSG is in the
factory default state and
is not providing fire
protection.
factory default state and
is not providing fire
protection.
A profile needs to be created
or assigned to the FWSG
before a mesh can be formed.
or assigned to the FWSG
before a mesh can be formed.
NO
WIRELESS
DEVS
WIRELESS
DEVS
NO DEV
Non-
latching
latching
The FWSG is functional,
but is not in
communication with any
wireless devices.
but is not in
communication with any
wireless devices.
Verify the desired wireless
devices are in range, have
matching profiles assigned,
have batteries, and are not in
the tampered condition.
Initiate "Mesh Formation
mode" to actively search for
devices.
devices are in range, have
matching profiles assigned,
have batteries, and are not in
the tampered condition.
Initiate "Mesh Formation
mode" to actively search for
devices.