High-Flying Electronics Technology Co. Ltd HF-A11X Manuale Utente
HF-A11x V3.1 User Manual
Shanghai High-Flying Electronics Technology Co., Ltd
www.hi-flying.com
46
AT+WEBU<CR>
+ok=<usr,password><CR>< LF ><CR>< LF >
Set
Operation
AT+ WEBU=< usr,password ><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
usr: User name for WEB page access;
password:Password for WEB page access;
password:Password for WEB page access;
4.2.2.15. AT+WAP
Function: Set/Query WIFI parameters as AP;
Format:
Format:
Query
Operation
AT+WAP<CR>
+ok=<wifi_mode,ssid,channel><CR>< LF ><CR>< LF >
Set
Operation
AT+ WAP=<wifi_mode,ssid,channel><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
wifi_mode:
WiFi
protocols
11BG
11B
11G
11BGN
11N
11B
11G
11BGN
11N
ssid: SSID when module works as AP;
channel: WIFI channel selection
channel: WIFI channel selection
AUTO
CH1~CH14
CH1~CH14
This Instruction only effective for HF-A11x works as AP. After HF-A11x module boots up again,
the setting will be effective. But user can set this command when module configured as STA.
the setting will be effective. But user can set this command when module configured as STA.
4.2.2.16. AT+WAKEY
Function: Set/Query WIFI security parameters as AP;
Format:
Format:
Query
Operation
AT+WAKEY<CR>
+ok=<auth,encry,key><CR>< LF ><CR>< LF >
Set
Operation
AT+ WAKEY=< auth,encry,key><CR>
+ok<CR>< LF ><CR>< LF >
Parameters:
auth: Authentication mode
OPEN
SHARED
WPAPSK
WPAPSK
encry:Encryption
algorithm
NONE: When “auth=OPEN”, effective;
WEP: When “auth=OPEN”, effective or “SHARED”, effective;
TKIP: When “auth=WPAPSK”, effective;
AES:When
WEP: When “auth=OPEN”, effective or “SHARED”, effective;
TKIP: When “auth=WPAPSK”, effective;
AES:When
“auth=WPAPSK”,
effective;
TKIPAES:When
“auth=WPAPSK”,
effective;
key: password, ASCII code, shall less than 64 bit and greater than 8bit;