Ricoh Company Ltd. PRSP35101 Manuale Utente
Loading Paper in the Bypass Tray
• Before printing on paper other than envelopes, make sure that the fusing unit levers inside the front
cover are pulled up. Leaving the levers lowered can cause print quality problems when printing on
paper other than envelopes.
paper other than envelopes.
• After loading paper in the tray, specify the paper type and size using the control panel to avoid
printing problems. This printer does not detect the paper size automatically.
• Load paper with the print side up and in the short-edge feed direction.
• Duplex printing is not possible.
• If paper is curled, straighten it before loading, by bending the paper in the opposite direction to the
• Duplex printing is not possible.
• If paper is curled, straighten it before loading, by bending the paper in the opposite direction to the
curl, for example.
• Do not load paper while the printer is printing.
• Make sure paper is not stacked above the paper guides inside the bypass tray.
• Make sure paper is not stacked above the paper guides inside the bypass tray.
1.
Open the bypass tray.
CMC073
If you load A4 (297 mm) or larger size paper, pull out the bypass tray extension.
CMC005
5. Paper and Other Media
80
rinmei-p2_com_hardware_guide_gb_00060096_eng.xml
5
Draft 2011/08/30
記載内容変更しました。
• You cannot use the bypass tray to feed in paper that requires a specified printing position
(such as preprinted paper). Use Tray 1 for such paper.
(such as preprinted paper). Use Tray 1 for such paper.
削除しました。
手順はRinmei-P1を流用してお
ります。
ります。
• Tray 1 and 2 are unavailable while
paper is being loaded in the Bypass
Tray.
• You cannot load paper when the
printer is in Energy Saver mode. To
disable Energy Saver mode,
click the [Stop/Start] key on the
control panel.
削除しました。
paper is being loaded in the Bypass
Tray.
• You cannot load paper when the
printer is in Energy Saver mode. To
disable Energy Saver mode,
click the [Stop/Start] key on the
control panel.
削除しました。