Ricoh Company Ltd. PRSP35101 用户手册

Loading Paper in the Bypass Tray

• Before printing on paper other than envelopes, make sure that the fusing unit levers inside the front

cover are pulled up. Leaving the levers lowered can cause print quality problems when printing on
paper other than envelopes.

• After loading paper in the tray, specify the paper type and size using the control panel to avoid

printing problems. This printer does not detect the paper size automatically.

• Load paper with the print side up and in the short-edge feed direction.
• Duplex printing is not possible.
• If paper is curled, straighten it before loading, by bending the paper in the opposite direction to the

curl, for example.

• Do not load paper while the printer is printing.
• Make sure paper is not stacked above the paper guides inside the bypass tray.

1.

Open the bypass tray.

CMC073

If you load A4 (297 mm) or larger size paper, pull out the bypass tray extension.

CMC005

5. Paper and Other Media

80

rinmei-p2_com_hardware_guide_gb_00060096_eng.xml

5

記載内容変更しました。

• You cannot use the bypass tray to feed in paper that requires a specified printing position 
(such as preprinted paper). Use Tray 1 for such paper.

 削除しました。

手順はRinmei-P1を流用してお
ります。

• Tray 1 and 2 are unavailable while 
paper is being loaded in the Bypass 
Tray. 
• You cannot load paper when the 
printer is in Energy Saver mode. To 
disable Energy Saver mode, 
click the [Stop/Start] key on the 
control panel. 
削除しました。